Lexmark MX71 Series Repair Manual page 346

5
Lift the motor cover, and remove the two screws (D) using a #1 Phillips screwdriver.
6
Remove the tray lift drive motor.
HCIT drawer assembly interface cable removal
1
Remove the HCIT drawer assembly rear cover. See
2
Remove the HCIT drawer assembly left cover. See
3
Disconnect the interface cable J1 from the controller board.
"HCIT drawer assembly rear cover removal" on page
"HCIT drawer assembly left cover removal" on page
Repair information
716
7463
709.
709.