Lexmark MX71 Series Repair Manual page 209

ADF scanner CCD removal
1
Remove the ADF front cover. See
2
Remove the ADF rear cover. See
3
Remove the ADF input tray. See
4
Remove the ADF lift tray. See
5
Disconnect the CCD ribbon cable (A) from the scanner CCD.
6
Remove the document set receiver sensor.
7
Remove the two screws with spring (B) securing the scanner CCD.
"ADF front cover removal" on page
"ADF rear cover removal" on page
"ADF input tray removal" on page
"ADF lift tray removal" on page
Repair information
579
587.
598.
589.
594.
7463