Stapler/offset stacker diverter plunger assembly removal
1
Remove the stapler left cover. See
2
Remove the three screws (A) from the main motor bracket.
Note: Removing the main motor bracket will not be required. Just move it out of the way to make it easier to
release the diverter motor bracket.
3
Remove the two screws (B) from the diverter motor bracket.
Note: Removing the diverter motor bracket will not be required. Just move it out of the way to access the parts
underneath it.
"Stapler/offset stacker left cover removal" on page
Repair information
760
7463
726.