Led Indicators; Autoloader Home Screen - HP BL536A User's & Service Manual

◦
Rebooting the Autoloader (Operations> Reboot Autoloader) (page 81)
◦
Enabling password locks (Operations > Enable Autoldr Password Locks) (page 81)
Support (page 81)
◦
Powering a drive on or off (Support > Power On/Off Drive) (page 81)
◦
Running the demonstration (Support > Run Demo) (page 82)
◦
Running the slot to slot test (Support > Run Slot To Slot Test) (page 82)
◦
Running the wellness test (Support > Run Wellness Test) (page 82)
◦
Upgrading firmware (Support > Autoloader FW Upgrade, Support > Drive FW Upgrade)
(page 83)
◦
Forcing the drive to eject a tape (Support > Force Drive To Eject Tape) (page 85)
◦
Viewing logs (Support > Autoloader Error Log) (page 84)
◦
Downloading a support ticket (Support > Download Support Ticket) (page 84)

LED indicators

The operator panel includes four LEDs that provide a summary of the device status as detailed in
Figure 58 (page
Figure 58 LEDs
1. Green
2. Amber
3. Amber
4. Amber

Autoloader home screen

The first line of the Home screen displays the device's product name as shown in
66). The second line displays a brief status message.
65).
Ready. Illuminated when power is on. Blinking during tape drive or robotics activity.
Clean. Illuminated when a cleaning cartridge should be used.
Attention. Illuminated if the device has detected a condition that requires attention.
Error. Illuminated if an unrecoverable error occurs. A corresponding error message displays
on the LCD screen.
Figure 59 (page
Operator control panel (OCP) 65