Using The Manual Magazine Release; Removing And Replacing The Base Chassis - HP BL536A User's & Service Manual

Figure 80 Operations: Magazines page

Using the manual magazine release

1. From the back of the Autoloader determine which magazine needs to be removed using
Figure 81 (page
Figure 81 Manual magazine release holes
1.
2.
2. Push a small metal pin or paper clip about 1.5 cm (0.6 inch) into the appropriate release hole
to push on the release latch (see
magazine and removes it from the Autoloader.
Figure 82 Removing the left magazine
1.
2.
IMPORTANT:
the Autoloader.

Removing and replacing the base chassis

In this process you will:
Record configuration settings.
Remove the tape cartridge from the tape drive.
134 Upgrading and servicing the Tape Autoloader
134).
Right magazine release
Left magazine release
Insert a pin into access hole
Release and remove the magazine
Do not force the pin once you encounter resistance. Doing so can damage
Figure 82 (page 134)) while another person grasps the