•
Upgrading firmware (Support > Library FW Upgrade, Support > Drive FW
127
•
Forcing the drive to eject a tape (Support > Force Drive To Eject
•
Viewing logs (Support > Library Error
•
Downloading a support ticket (Support > Download Support
LED indicators
The operator panel includes four LEDs that provide a summary of the device status as detailed in
Figure
78.
Figure 78 LEDs
.
1.
Green
2.
Amber
3.
Amber
4.
Amber
Library home screen
The first line of the Home screen displays the device's product name. The second line displays a brief
status message.
Drive status definitions are listed in
Table 24 Drive status
Status
IDLE
RD
FWD
WR
HP StorageWorks MSL2024, MSL4048, MSL8048, and MSL8096 Tape Libraries User and service
Ready. Illuminated when power is on. Blinking during tape drive or robotics activity.
Clean. Illuminated when a cleaning cartridge should be used.
Attention. Illuminated if the device has detected a condition that requires attention.
Error. Illuminated if an unrecoverable error occurs. A corresponding error message
displays on the LCD screen.
Table
Definition
Drive has a tape inserted, but there is no activity
Drive is reading
Drive is forwarding
Drive is writing
Log)" on page 129
24.
Upgrade)" on page
Tape)" on page 130
Ticket)" on page 129
guide
105