Updating The Current Media Inventory; Releasing And Replacing The Magazines - HP BL536A User's & Service Manual

Figure 48 Operations: Move Media page
To move a tape, select the source and destination and then click the Move button in the center of
the screen to start the move.

Updating the current media inventory

Use the Operations: Inventory page
inventory.
Figure 49 Operations: Inventory page

Releasing and replacing the magazines

Use the Operations: Magazine page
Release, the device will unlock the magazine and display Left Magazine Unlocked or Right Magazine
Unlocked on the OCP screen. If you do not remove the magazine within a few seconds, the device
will lock it. When you replace the magazine, the device will inventory the magazine's tape
cartridges.
Figure 50 Operations: Magazines page
NOTE: To manually release a magazine, see
However, this manual process should only be used if the magazine cannot be released using the
OCP or RMI.
to have the device re-scan the tapes to update the media
to release the left, right, or both magazines. When you click
Releasing the magazines manually (page
Remote management interface (RMI)
104).
59