Turning the Pump On and Off
To turn on the pump,
power switch
When the pump powers on, it performs
various self-tests. Watch and listen for
the following:
• The green and amber lights flash.
• The display shows a blue and
amber rotating arc, followed by a
®
CADD
-Solis Ambulatory Infusion
System display. If you see any stripes,
or black or white pixels, or if your display appears faulty, contact
your health care provider.
• When power up completes, six beeps sound. Contact your health
care provider if you do not hear the beeps, because there may be a
problem with the audible alarms.
• If any issues are detected during power on, alarms will sound
and/or be displayed. If the alarms continue after you follow any
on-screen help, contact your health care provider.
To turn off the pump,
down?" message appears, press Yes. The pump then powers off.
When the pump is powered off:
• The display is blank.
• Keypad presses are not detected.
• Medication is not infused.
• Alarms are not sensed, and audio and visual alarms are not
displayed.
• If the AC adapter is plugged in, the blue AC power light remains
on. No other lights are lit.
• If the pump is connected to AC power and a rechargeable battery
pack is installed, the battery pack continues to charge.
16
press and hold the
.
press the power switch
Power
Switch
. When the "Power