Table of Contents
Advertisement
Starting the Pump
Infusion begins when the pump starts. When the pump is running,
"Running" appears with green highlighting on the status bar and
the green light on the pump flashes.
Note: Before starting the pump, be sure the tubing is primed and
the pump is connected to your catheter as instructed by your
health care provider.
To start the pump:
1. If the pump is programmed, the
" Ready to Begin " message is displayed
on the home screen.
– OR –
If the pump has been started and then
stopped, the home screen uses the red
color in the graphic. In this example,
a previous dose was interrupted.
2. Press the stop/start 9 key on
the pump.
3. When "Start Pump?" appears,
select Yes.
Note: If you want to set a delayed
start time, see "Next Dose Start
Time" on "Next Dose Start Time"
on page 34.
31
Hide quick links:
Advertisement
Table of Contents
