Setting The Time And Date - Smiths Medical cadd-solis VIP 2120 Information Manual

Setting the Time and Date

The time and date on the pump display should be current. The
pump uses the date and time to determine when next dose start
times begin. When necessary, set the time or date for the pump. The
pump time does not automatically change for daylight saving time.
The pump clock is powered by a separate internal battery that
recharges when the pump is powered on. The pump retains the time
and date even when the AA batteries or rechargeable battery pack
are removed. If the pump is off for a long period of time, the correct
time and date may not be shown until the pump is powered on and
the internal battery recharges; set the time and date if necessary.
To set the time:
1. In the Tasks menu, press U or D to
highlight Change Time and Date, and
press S.
2. In the Change Time and Date menu,
press U or D to highlight Current
Time, and press S.
3. Press U or D to scroll to the correct
hour (1–12, or 0–23 if your pump was
set up to use a 24-hour clock) and press
S to navigate to the minutes field.
35