Download Print this page

PIAGGIO X9 Service Station Manual page 10

Hide thumbs Also See for X9:

Advertisement

Safety prescriptions
- If the work to be carried out requires the vehicle
engine to be running, make sure the workshop is
well ventilated and use proper exhausters. Do not
run the engine in closed places. Exhaust fumes are
toxic.
Battery electrolyte contains sulphuric acid. Protect
the eyes, clothes and skin. Sulphuric acid is highly
corrosive, if it comes into contact with eyes or skin,
wash the affected area abundantly with water and
seek immediate medical assistance.
The battery produces hydrogen gas which is poten-
tially explosive. No not smoke near the battery and
keep naked flames and sparks well clear, especially
when the battery is on charge.
Petrol is highly flammable and can be explosive in
certain conditions. Do not smoke in the work area
and do not introduce naked flames or sparks.
Clean brake shoes, drums and pads in a well
ventilated place. When using compressed air direct
the jet away from you to avoid inhaling the dust.
Although the brake linings are asbestos-free, inha-
lation of the resulting dust is harmful.
Vehicle identification
Maintenance rules
- Use only genuine PIAGGIO spare parts and recom-
mended lubricants. The use of non-original or non-
conforming spare parts can cause damage to the
vehicle.
- The only special tools that can be used are those
expressly designed for this vehicle.
- Always fit new gaskets, seals rings and split pins when
reassembling parts.
- After disassembly, clean parts with non-flammable
solvent or a solvent with a high flash point. Lubricate
all surfaces before reassembly with the exception of
conical couplings.
- After reassembling, check that all the components are
correctly installed and that they work perfectly.
- Use only metric tools for disassembly, assembly and
maintenance work. Metric screws, nuts and bolts
cannot be interchanged with BS components. The
vehicle may be damaged if unsuitable tools or nuts,
bolts or screws are used.
- When working on the electrical system, ensure elec-
trical components are correctly installed, paying
particular attention to ground and battery connec-
tions.
1 s t Update t o part no. 594599 X 9 125-180 c c 4 T 4 V
Primera actualización dib. 5 9 4 5 9 9 X 9 125-180 c c 4 T 4 V
e
1
Atualização Des. 5 9 4 5 9 9 X 9 125-180 c c 4 T 4 V
General instructions
1 - 1

Advertisement

loading