Adjusting The Density Of Background Color - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Adjusting the Density of Background Color

This mode enables you to adjust the density of the background color when
scanning color originals. You can adjust red, green, and blue separately.
IMPORTANT
The setting for [Adjust Background] is invalid when all of the conditions below are met.
- [100 × 100 dpi], [150 × 150 dpi], or [200 × 100 dpi] is selected as the resolution. (See
"Specifying the Color Mode and Resolution," on p. 3-2.)
- [B&W] is selected as the color mode. (See "Specifying the Color Mode and
Resolution," on p. 3-2.)
- [Text] is selected as the image quality. (See "Adjusting the Density and Image
Quality," on p. 3-9.)
To activate [Adjust Background], change the settings.
1
Press
destination.
NOTE
• For instructions on how to place your originals, see Chapter 2, "Basic Operations," in
the Reference Guide.
• For instructions on how to specify the destination, see "Basic Sending Methods," on
p. 2-2, or Chapter 4, "Specifying Destinations Easily and Quickly."
2
Press [Scan Settings] ➞ select [Option].
For help, see step 2 in "Specifying the Document Size," on p. 3-6.
3
(SEND) ➞ place your originals ➞ specify the

Adjusting the Density of Background Color

Press [Adjust Background].
3
3-17