Canon ImageRUNNER 2545i Sending And Facsimile Manual page 220

A
H
G
F
A Specifies the color mode of scanned originals. (See "Specifying
(Color Mode) the Color Mode and Resolution," on p. 3-2.)
B Specifies the resolution of scanned originals. (See "Specifying
(Resolution) the Color Mode and Resolution," on p. 3-2.)
C Stamps the front side of scanned originals. (See "Stamping
(Finished Stamp) Originals Which Have Already Been Scanned," on p. 3-23.)
D Adjusts the density of scanned originals. (See "Adjusting the
(Density) Density and Image Quality," on p. 3-9.)
E Adjusts the image quality of scanned originals. (See "Adjusting
(Original Type) the Density and Image Quality," on p. 3-9.)
F Adjusts the density of the background color when scanning color
(Adjust Background) originals. (See "Adjusting the Density of Background Color," on
p. 3-17.)
G Specifies the file format of scanned originals. (See "Specifying
(File Format) the File Format," on p. 3-20.)
H Specifies the document size. (See "Specifying the Document
(Document Size) Size," on p. 3-6.)
IMPORTANT
• [Finished Stamp] is available only when the following options are attached to the
machine:
- Stamp Unit-B1
- Feeder* (DADF-AA1 for the imageRUNNER 2545/2535 or DADF-AB1 for the
imageRUNNER 2530/2525/2520)
* Standard-equipped for the imageRUNNER 2545i/2535i/2530i/2525i/2520i.
• The setting for [Adjust Background] is invalid when all of the conditions below are met.
- [100 × 100 dpi], [150 × 150 dpi], or [200 × 100 dpi] is selected as the resolution. (See
"Specifying the Color Mode and Resolution," on p. 3-2.)
- [B&W] is selected as the color mode. (See "Specifying the Color Mode and
Resolution," on p. 3-2.)
- [Text] is selected as the image quality. (See "Adjusting the Density and Image
Quality," on p. 3-9.)
To activate [Adjust Background], change the settings.
B
C
D
E
Transmission Related Items
7
7-7