2
3
3
4
Press
To cancel scanning, press [Cancel] or
The scanned data is sent to the specified destination when scanning is complete.
A stamp mark (
NOTE
• If the stamp mark is not clear, see Chapter 5, "Routine Maintenance," in the Reference
Guide.
• The specified settings return to their defaults after documents are sent. If you want to
keep the settings as the default, see "Registering Frequently Used Scan Settings as
Default (Standard Send Settings)," on p. 7-5.
3-24
Stamping Originals Which Have Already Been Scanned
(Start) to start scanning your originals.
) appears on the original output.
Press [Send Settings].
Press [Stamp] ➞ [Done].
NOTE
To cancel the Stamp mode, press
[Stamp] again.
(Stop).