Canon ImageRUNNER 2545i Sending And Facsimile Manual page 60

5
In this step, the keys listed below are also available as needed.
[Tone]:
[R]:
[End]:
NOTE
• For instructions on how to enter characters, see Chapter 2, "Basic Operations," in the
Reference Guide.
• You cannot use group dialing for the Manual Sending mode.
6
When you hear a high-pitched tone, press
scanning your originals.
To cancel scanning, press [Cancel] or
The scanned data is sent to the specified destination when scanning is complete.
IMPORTANT
• The machine automatically detects the size of the original when scanning it. For the
size of the original the machine can detect, see Chapter 2, "Basic Operations," in the
Reference Guide.
• If the machine cannot detect the size of the original correctly, the Original Size screen
appears when you press
[OK].
Enter the fax number (up to 120
characters) using
(numeric keys).
If the number is registered in the one-touch
buttons, you can also press [One-touch
Buttons] to specify the number. (See
"Using the One-Touch Buttons," on
p. 4-35.)
Press when you want to directly call an extension line that is
connected to a PBX (Private Branch eXchange), which accepts
only tone dialing. If you press [Tone], the letter <T> appears.
Press to use the R-key. (See "Calling from an Extension," on
p. 2-50.)
Press to cancel the Manual Sending mode.
(Stop).
(Start). Specify the size of the original manually ➞ press
-
(Start) to start
Basic Sending Methods
2
2-33