Canon ImageRUNNER 2545i Sending And Facsimile Manual page 67

IMPORTANT
• To specify your folder as destination, make sure of the following:
- [Allow] or [Only allow sending to own address or specified folder] in [File Send] is
- Your home directory attribute is registered on an authentication server. (Consult your
• If Active Directory is not used as an authentication server, or you want to manually
specify your folder as destination, the folder specified in [Folder Path] under [Specify
destination folder] is used as the destination when [Send File To Self] is pressed. (See
Chapter 4, "Customizing Settings," in the Remote UI Guide.)
2
1
Follow steps 1 to 6 in "Logging in to Authorized Send," on p. 2-35.
The top screen (Send) appears.
2
3
NOTE
If the settings under <When Sending File to Own Address> are configured to display
an authentication screen, the File screen appears when you press [Send File To Self].
(See Chapter 4, "Customizing Settings," in the Remote UI Guide.) Specify the user
name and password ➞ press [OK].
2-40
Advanced Sending Methods
selected. (See Chapter 4, "Customizing Settings," in the Remote UI Guide.)
network administrator.)
Press [New Address].
Press [Send File To Self].
Your folder path appears on the top screen.