Receiving Problems - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Transmissions are slow.
Cause 1
Remedy
Cause 2
Remedy
Documents cannot be sent overseas (error code # 0018).
Cause 1
Remedy
Cause 2
Remedy

Receiving Problems

The machine does not receive documents.
9
Cause
Remedy
The machine does not receive I-fax documents.
Cause
Remedy
9-4
Identifying and Isolating Problems
Documents are sent at a high resolution.
It is recommended that you send text only documents at a low resolution. (See
"Specifying the Color Mode and Resolution," on p. 3-2.)
The ECM setting is activated when fax documents are sent.
Set ECM TX to 'Off'. (See "Sending with Error Correction Mode (ECM
Transmission)," on p. 7-23.)
No pause is not inserted in the fax number.
Insert a pause after the international access code or after the recipient's fax
number, and then dial the number again. (See "Dialing an Overseas Number,"
on p. 2-52.)
Long Distance on the Option screen is set to 'Domestic' when sending a fax
overseas.
Set Long Distance to 'Long Distance (1)', 'Long Distance (2)', or 'Long Distance
(3)', and then dial the number again. (See "Fax Numbers," on p. 4-15, or
"Registering the One-Touch Buttons," on p. 4-31.)
There is insufficient memory available.
Delete unwanted documents and documents with errors from memory to
increase the amount of available memory. (See "Checking/Changing the Status
of Documents Received in Memory," on p. 6-14.)
The network settings are not specified.
If the network settings are not specified, documents cannot be received.
Confirm this with your system administrator.