Registering In The One-Touch Button - Canon ImageRUNNER 2545i Sending And Facsimile Manual

Registering in the One-Touch Button

1
Display the Register One-touch Button screen ➞ press [Register/
Edit].
For help, see steps 1 and 2 in "Registering the One-Touch Buttons," on p. 4-31.
2
3
Follow steps 2 to 4 in "Specifying Addresses via an LDAP Server,"
on p. 4-55 to search destinations.
4
To continue searching, press [Back].
NOTE
• To cancel a selected destination, select the destination again to clear the check mark.
• If both the Send function (optional for the imageRUNNER 2545/2535/2530/2525/2520)
is activated and the optional Super G3 Fax Board-AG1 is attached to the machine, you
can sort and limit the view of the displayed addresses by using the Type drop-down
list.
• The destinations you can specify may vary depending on the settings under <Send
Restriction Settings>. (See Chapter 4, "Customizing Settings," in the Remote UI
Guide.) For example, if E-mail Send is set to 'Do not allow' or 'Only allow sending to
own address', e-mail addresses are not displayed as the search results.
Press [Network Add. Book].
Select the desired destination
from the search results.
You cannot select multiple destinations at a
time.
If you press [Register e-mail address for
I-Fax], the selected e-mail address can be
registered as an I-fax destination. To
register e-mail addresses as I-fax
addresses, register one e-mail address at a
time.
LDAP Server
4
4-65