Canon ImageRUNNER 2545i Sending And Facsimile Manual page 143

2
NOTE
• You can select multiple one-touch buttons.
• To cancel the selected one-touch button, press [One-touch Buttons] ➞ press the
selected one-touch button again.
4
• The destinations you can specify may vary depending on the settings under <Send
Restriction Settings>. (See Chapter 4, "Customizing Settings," in the Remote UI
Guide.) For example, if E-mail Send is set to 'Do not allow' or 'Only allow sending to
own address', the one-touch buttons containing e-mail addresses or I-fax addresses
are grayed out.
• If the settings under <When Sending File to Address Registered in Address Book> are
configured to display an authentication screen, do not specify multiple file server
addresses at the same time. (See Chapter 4, "Customizing Settings," in the Remote UI
Guide.) If you specify multiple file server addresses, an error message appears when
you press
3
● If you want to check the selected destination:
❑
4-36
One-Touch Buttons
(Start) in step 4.
Press [Details] ➞ check the destination's information ➞ press [Done].
If the destination is a group address, select one destination at a time ➞ press
[Details] ➞ check the destination's information ➞ press [Done] twice.
For help, see step 3 in "Using the Address Book," on p. 4-24.
Select the desired one-touch
button.
Each one-touch button is assigned a three
digit number. If you know the one-touch
button's three digit number, enter the
number for the desired one-touch button
using - (numeric keys).
Press [ ] or [ ] to scroll to the desired
one-touch button if it is not displayed.
Press [Done].
The selected destination appears on the top
screen.