Canon ImageRUNNER 2545i Sending And Facsimile Manual page 57

4
2
● If you want to check or change the specified destination:
❑
● If you want to delete the specified destination:
❑
NOTE
If Confirm Entered Fax Numbers in Restrict the Send Function is set to 'On', you
should enter the fax number again for confirmation. Enter the fax number you entered
in step 3 ➞ press [OK]. (See Chapter 4, "Setting the Send Function," in the System
Settings Guide.)
5
6
Press
To cancel scanning, press [Cancel] or
The scanned data is sent to the specified destination when scanning is complete.
After the fax is sent, the Direct Sending mode is canceled automatically.
2-30
Basic Sending Methods
Press [Details] ➞ check or change the destination's information ➞ press [OK].
For help, see step 4 in "Sending an E-Mail Message," on p. 2-2.
Press [Erase].
For help, see step 4 in "Sending an E-Mail Message," on p. 2-2.
(Start) to start scanning your originals.
Press [Direct] ➞ [OK].
The Direct Sending mode is set and the
specified destination appears on the top
screen.
You can also set to the Direct Sending
mode on the Send Settings screen. On the
top screen, press [Send Settings] ➞
[Direct] ➞ [Done].
To cancel the Direct Sending mode, press
[Direct] again.
Press [Scan Settings] to specify
the scan settings you require.
For more information, see Chapter 3,
"Specifying the Scan Settings."
(Stop).