Arctic Cat 500 Service Manual page 89

 NOTE: It is advisable to lock the brake when loosen-
ing the cap screws securing the rear driveshaft.
19. Remove the positive cable from the starter motor and
route it out of the way.
20. Disconnect the speed sensor connector from the sen-
sor housing.
21. On the right-side, disconnect the stator coil and
crankshaft position sensor connectors.
22. Disconnect the temperature sensor lead from the wir-
ing harness.
CD805
23. Remove the spark plug wire from the spark plug;
then remove the coil from the frame.
24. Remove the cap screw securing the engine ground
wire to the engine.
CD796
25. Remove the
Account for all mounting hardware.
CD794
engine mounting through-bolts.
CD788
CD814
KC201A
CD809
87