Arctic Cat 500 Service Manual page 132

18. Place the left-side footwell and foot peg in position
on the frame; then secure with existing hardware.
Tighten securely.
19. Install the front body panel with existing hardware.
20. Connect the gasline hose to the fuel rail; then con-
nect the gasline hose connector to the fuel rail.
130
CD774
21. Install the side panels into position.
22. Place the battery into position in the battery compart-
ment; then install the battery cables and vent hose.
Secure with the battery cover.
Battery acid is harmful if it contacts eyes, skin, or cloth-
ing. Care must be taken whenever handling a battery.
23. Add proper amounts of engine/transmission oil and
coolant.
24. Install the seat.
If the engine had a major overhaul or if any major part
was replaced, proper engine break-in procedures must
be followed (see General Information). If the proper
engine break-in procedures are not followed, severe
engine damage may result.
CAUTION
CAUTION
FI092E