Arctic Cat 500 Service Manual page 39

2. Remove the nut from the lower end of the box lift
support.
3. Remove the two cap screws and lock nuts securing
the cargo box to the frame; then remove the cargo
box and discard the lock nuts.
 NOTE: Never reuse a lock nut. Once a lock nut has
been removed, it must be replaced with a new lock
nut.
CLEANING AND INSPECTING
1. Clean all cargo box components with soap and warm
water.
2. Inspect the cargo box for cracks, tears, and loose
mounting hardware.
3. Inspect the welds of the cargo box frame for cracking
or bending.
4. Inspect the cargo box gate latches for smooth opera-
tion.
INSTALLING
1. Place the cargo box into position on the frame.
Secure with cap screws and new lock nuts. Tighten
securely.
CD122
2. While an assistant holds the cargo box in the raised
position, secure the lower end of the box lift support
to the frame with the cap screw and nut.
3. Lower the cargo box and press down firmly on the
front of the box. It will automatically lock into posi-
tion.
CD122
37