Arctic Cat 500 Service Manual page 84

8. Align the shift forks to allow engagement with the shift
cam; then engage the shift forks and slide the shift fork
shaft into the locating boss in the crankcase.
9. Install the input driveshaft.
10. Install the spacer (1), shaft (2), reverse idler gear, and
washer (3).
82
11. Install the secondary output driveshaft assembly into
the crankcase half making sure the front and rear
bearing alignment pins are seated in the recesses;
FI653A
then install the center carrier bearing alignment
C-ring.
FI655A
FI646
FI641A
FI645
FI660A
FI659A
FI661A