Testing - Toro titan zx Service Manual

Testing

1. Disconnect the harness connection from the seat
switch.
2. With a multimeter set to the Ohm or Continuity
setting, check the continuity between the two switch
terminals:
- When the seat is vacated, the switch should
be OPEN and there should be NO continuity
between the two switch terminals.
- When the seat is occupied, the switch CLOSES
and there should be continuity between the two
switch terminals.
(Fig. 117)
Toro TITAN 2014 Service Manual
ELECTRICAL
Fig. 117 PICT-2005
7
7-5