Motion Control Box / Seat Pivot Installation - Toro titan zx Service Manual

CHASSIS

Motion Control Box / Seat Pivot Installation

1. Install the control box / motion control assembly onto
the frame.
2. Install the (6) fasteners securing the control
box assembly (G) to the frame and torque to
specification:
• (H) Bolts - 7 ft-lbs. (10 Nm)
• (I) Carriage Bolt Fasteners - 14 ft-lbs. (18 Nm)
(Fig. 027)
3
H
3. Install the (2) bolts/nuts (J) that secure the floor pan
and front motion control bolt to the frame and torque
to specification - 17 ft-lbs. (10 Nm) (Fig. 028).
J
3-16
I
Fig. 027 PICT-3010
J
Fig. 028 PICT-3013
4. Install the motion control rod and clips and pins (F)
(Fig. 029).
Fig. 029
5. Install the parking brake linkage, washer and pin,
and (G) (Fig. 030).
G
Fig. 030
F
PICT-3010
PICT-3011
Toro TITAN 2014 Service Manual