Transaxle Installation - Toro titan zx Service Manual

Transaxle Installation

1. Position the hydro assembly up into the unit frame
and align mounting points.
2. Apply Loctite 242 to the (2) hydro center support
®
bolts.
3. Loosely install ALL hydro mounting spacers, fast-
eners and center support bolts. Do not fully tighten
at this time.
4. Torque hydro mounting fasteners in sequence to
specification and shown:
1st – Apply Loctite 242 to the hydro center support
bolts. Torque bolts to specification – 17 ft-lbs. (23
Nm) (Fig. 078).
Fig. 078
Toro TITAN 2014 Service Manual
HYDROSTATIC DRIVE SYSTEM
2nd - Torque the (1) front hydro mount fastener to
specification – 17 ft-lbs. (23 Nm) (Fig. 079).
3rd – Torque the (1) rear hydro mount fastener to
specification – 17 ft-lbs. (23 Nm) (Fig. 080).
PICT-2048
Fig. 079 PICT-2050
Fig. 080 PICT-2051
5
5-11