HYDROSTATIC DRIVE SYSTEM
3. Install the drive belt around the drive pulley.
4. Install the drive belt tensioner spring as oriented
below (Fig. 069).
5
5-8
Fig. 069
PICT-3034
5. Apply Loctite
242 to the PTO clutch bolt threads.
®
6. Install the PTO clutch. Be sure the PTO clutch stop
bracket is properly engaged into the clutch slot
(Fig. 070).
Fig. 070
7. Torque the clutch bolt to specification - 55 ft-lbs. (75
Nm).
8. Install the PTO belt around the PTO clutch pulley.
9. Verify proper PTO belt routing and then install the
PTO belt tensioner spring to the deck. See "PTO
Belt Replacement and Belt Routing" on page 6-4.
10. Safely lower unit and verify proper drive system
function.
PICT-3036
Toro TITAN 2014 Service Manual