16. Apply Loctite
242 to the PTO clutch bolt threads.
®
17. Install the PTO clutch onto crankshaft. Be sure PTO
clutch engages with the clutch stop bracket.
18. Install and torque the PTO clutch bolt to specification
– 55 ft-lbs. (76 Nm).
19. Install PTO belt onto PTO clutch. Verify proper PTO
belt routing; see "PTO Belt Replacement and Belt
Routing" on page 6-4. Install the PTO belt tensioner
spring to the deck.
20. Connect battery cables and verify engine oil level.
21. Safely start engine and verify proper operation.
Toro TITAN 2014 Service Manual
ENGINE
4
4-5