Toro titan zx Service Manual page 39

4. Apply Loctite 242 to the actuator arm pivot bolt
®
threads (C).
5. Tighten nut (B) until the control lever has an
acceptable and safe resistance feel when moved
from stop to stop.
- Over tightening nut (B) may damage the Teflon
washer and cause excessive resistance.
- Under tightening nut (B) may cause the actuator
arm to feel loose.
(Fig. 035)
B
Fig. 035
Toro TITAN 2014 Service Manual
PICT-2082
CHASSIS
3
3-19