Toro titan zx Service Manual page 40

CHASSIS
6. Install the upper motion control damper washer and
shoulder bolt (A) to the activator arm (E) and torque
to specification - 7.5 ft-lbs. (10 Nm).
7. If needed, install the control box back onto the frame
as outlined in this chapter.
8. Install the control lever and torque the fasteners to
specification - 30 ft-lbs. (40 Nm).
9. Perform the "Neutral Adjustment" and "Forward
Tracking Adjustment" procedures on pages 5-4 and
5-5 (Fig. 036).
3
A. Shoulder bolt - 7.5 ft-lbs. (10 Nm)
B. Actuator arm nut
C. Actuator arm pivot bolt
D. Actuator arm
E. Activator arm
F. Activator arm pivot bolt
3-20
F
A
B
D
1
2
4 3
Fig. 036
Washer 1: Standard Pivot Washer
Washer 2: Standard Pivot Washer
Washer 3: Standard Pivot Washer
Washer 4: Teflon Washer
C
E
F
PICT-3015
Toro TITAN 2014 Service Manual