Software Version; Password Input; Password Set - Delta VFD-VE User Manual

Chapter 4 Parameters
30.0 (a decimal point).

Software Version

00-06
Control
VF VFPG
mode
Settings
Display
Password Input
00-07
Control
VF VFPG
mode
Settings
Display

The function of this parameter is to input the password that is set in Pr.00-08. Input the
correct password here to enable changing parameters. You are limited to a maximum of
3 attempts. After 3 consecutive failed attempts, a blinking "PcodE" will show up to force
the user to restart the AC motor drive in order to try again to input the correct password.

When forgetting password, you can decode by setting 9999 and press button
repeat it again (setting 9999 and press button
settings will be set to factory setting.
Password Set
00-08
Control
VF VFPG
mode
Settings
Display

To set a password to protect your parameter settings.
If the display shows 00, no password is set or password has been correctly entered in
Pr.00-07. All parameters can then be changed, including Pr.00-08.
The first time you can set a password directly. After successful setting of password the
display will show 01 which means password protection is now effective. And all the
parameters will display 0 (except Pr00-07 and Pr00-08) and cannot be modified.
Be sure to record the password for later use.
To cancel the parameter lock, set the parameter to 00 after inputting correct password
4-52
SVC FOCPG TQCPG
Read Only
#.##
SVC FOCPG TQCPG
1 to 9998 and 10000 to 65535
00~02 (times of wrong password)
SVC FOCPG TQCPG
1 to 9998 and 10000 to 65535
00 No password set or successful input in Pr. 00-07
01 Password has been set
Factory setting: Read Only
Factory setting: 00
again). Please note that all the
Factory setting: 00
Unit: 1
and
Unit: 1