Drive Train; Tires - CanyCom CMX222 Operator's Manual

5

Drive Train

• Stop engine when servicing drive train.
• Allow machine to cool off before servicing. Engine and its ancillaries are very
hot after operation and may pose a burn hazard.
• Dispose of drained oil properly.

Tires

• Inflate tires to the specified pressure. Under- or over-inflation causes uneven
wear or other damages to tires.
5319M-0508-010E
CMX222
Front
Rear
CM223
Front
Rear
Maintenance
1.
2.
Valve Cap
3.
4.
Tire Size
TA 4.00-8 (2PR)
19×8.00-10 (4PR)
AGS 4.00-7 (4PR)
17X8.00-8
-56-
Park machine on a level ground.
Remove valve cap.
Check tire air pressure. If different from the
specified values, adjust pressure.
Put valve cap back in place.
Pressure KPa(kgf/cm )
2
110 (1.1)
220 (2.2)
220 (2.2)
220 (2.2)