Drive Train; Tires - CanyCom MASAO CMX227 Operator's Manual

Drive Train

• Stop the engine and remove the ignition key when servicing the drive train.
• Allow the machine to cool off before servicing. An engine and its ancillaries are
very hot after operation and may pose a burn hazard.
• Dispose of drained oil properly.

Tires

• Inflate the tires to the specified pressure. Under- or over-inflation causes
uneven wear or other damages to the tires.
Front Wheel
Rear Wheel
5332M-0507-010E
Maintenance
Tire Size
4.00-7 (4PR)
AGR 4.00-7 (2PR)
17×8.00-8 (4PR)
1.
2.
Valve Cap
3.
4.
Pressure KPa(kgf/cm
Park the machine on a level ground.
Remove the valve cap.
Check the tire air pressure. If it is different
from the specified values, adjust the
pressure.
Put the valve cap back in place.
-63-
)
2
240 (2.4)
120(1.2)
240 (2.4)
5