Using the Driver Installation Script
The driver installation script is available on the Sun Tools and Drivers CD, which is
included with your server. You can download an ISO image of the Tools and Drivers
CD ISO at:
http://www.sun.com/servers/x64/x4150/downloads.jsp
http://www.sun.com/servers/x64/x4250/downloads.jsp
http://www.sun.com/servers/x64/x4450/downloads.jsp
Note – The driver installation script also mounts a diagnostic partition. If a
diagnostic partition is present, running the script creates and mounts it on
diagpart.
Installing the Drivers Using KVMS Over IP
This method is for installing the drivers on a server without a CD/DVD drive or
KVM attached.
See the instructions in
CD/DVD" on page 25
Installing Drivers Directly Onto the Server
If your server has an onboard CD/DVD drive or attached CD/DVD drive, you can
install the drivers directly, using the Tools and Drivers CD.
▼ To Install Driver Directly Onto the Server
1. Log in to the server as root (superuser).
2. Insert the Tools and Drivers CD into the CD/DVD drive.
The CD is automatically mounted by the Solaris 10 OS.
3. Change to the /cdrom/cdrom0/drivers/sx86 directory by entering the
following command:
# cd /cdrom/cdrom0/drivers/sx86
"Installing Using Remote KVMS Over IP With Virtual
or the ELOM or ILOM documentation for details.
Chapter 3
Solaris 10 Operating System Installation
27