Installing The Drivers Using Kvms Over Ip; To Install The Drivers Using Kvms Over Ip; Installing Drivers Directly Onto The Server; To Install Drivers Directly Onto The Server - Sun Microsystems Fire X4150 Installation Manual

Installing the Drivers Using KVMS Over IP

Before performing a remote installation, use the web GUI to disable the session
timeout function. This allows the installation process to proceed without
interruption.

▼ To Install the Drivers Using KVMS Over IP

1. Mount the Tools and Drivers CD according to the instructions in
Linux Using Remote KVMS Over IP With Virtual CD/DVD" on page
2. Change to the /mountpoint/drivers/linux/operating_system directory.
/mountpoint The directory where the CD is mounted.
operating_system The type of Linux installed on the server (red_hat or suse).
For example:
# cd /mnt/dvdrom/drivers/linux/red_hat
Note – If you have OEL installed on the server, use the drivers in the red_hat
directory.
3. Run the following command to install the drivers:
# sh install.sh
Note – If the install.sh script detects the Sun StorageTek controller card, it
automatically updates to the latest driver.
4. Eject the CD after the driver installation is complete.
5. Reboot the server.

Installing Drivers Directly Onto the Server

If your server has a CD/DVD drive, you can install the drivers directly onto the
server, using the Tools and Drivers CD.

▼ To Install Drivers Directly Onto the Server

1. Log in to the server as root (superuser).
52 Sun Fire X4150, X4250, and X4450 Servers Operating System Installation Guide • November 2009
"Installing
49.