Installing Server-Specific Drivers - Sun Microsystems Fire X4150 Installation Manual

4. From the main menu, click the Remote Control tab and select Redirection.
The Redirection screen appears with a Launch Redirection button.
5. Click the Launch Redirection button to open a remote console window.
A screen appears with a Launch button. It also identifies your current host name,
IP address, and user name.
6. Click Launch.
7. Insert the OS CD/DVD to be installed on the server into the local CD/DVD
drive.
8. In the remote console window, select Storage, and then select Mount devices.
The Device Configuration window appears.
Note – If the local server has a CD/DVD drive, be sure that it does not contain
bootable medium, or configure the server's BIOS so that the virtual CD/DVD drive
is higher on the boot list than the local CD/DVD drive.
9. In the Storage 1 Source field, from the drop-down list, select the CD/DVD drive
that you are using to install the OS.
10. Click Submit.
11. The instructions for installing the OS are the same as the instructions for using
a local CD/DVD drive and monitor. See
CD/DVD Media and the Serial Port" on page

Installing Server-Specific Drivers

You can use the methods described in the following sections to install server-specific
drivers onto your server:
"Using the Driver Installation Script" on page 27
■
"Installing the Drivers Using KVMS Over IP" on page 27
■
"Installing Drivers Directly Onto the Server" on page 27
■
26 Sun Fire X4150, X4250, and X4450 Servers Operating System Installation Guide • November 2009
"Using Direct Installation with
19.