Before You Begin
To create a RAID array for your server using the Sun StorageTek controller card, you
must have:
The Sun StorageTek controller card installed in the server. For controller card
■
installation instructions, see your server service manual.
Set up your display to access the server output (see
■
During Installation" on page
▼ To Create a RAID Array for the Sun StorageTek
Controller Card
1. Power on the server.
2. Watch the video output, and when the Sun StorageTek card is recognized, press
Control-A to enter the Sun StorageTek controller card's BIOS utility.
3. Set up the RAID according to the instructions in the Sun Intel Adaptec BIOS
RAID Utility User's Manual.
4. Exit the RAID utility.
5. Install the OS.
6. Linux users must run install.sh from the Tools and Drivers CD to update to
the latest RAID driver.
7. Install the latest Sun StorageTek management software located on the Tools
and Drivers CD under RAIDmgmt.
14
Sun Fire X4150, X4250, and X4450 Servers Operating System Installation Guide • November 2009
3).
"Accessing the Server Output