Installing The Raid Management Utility Software; To Install The Sun Storagetek Raid Management Utility Software - Sun Microsystems Fire X4150 Installation Manual

4. Run the installation script by entering the following command:
# sh install.sh
The AST2000 VGA drivers are now installed.
The script prompts you to reboot the server for changes to take effect.
5. Reboot the server.
6. When Xserver choices are displayed, select the default Xorg.
7. When prompted for networking information about your server, enter the
networking information for your server.

Installing the RAID Management Utility Software

If your server is equipped with a Sun StorageTek RAID controller card, perform the
following procedure,
does not provide Solaris support for its RAID management software. If your server
is equipped with an LSI SAS3081E-S controller card, you must manage RAID using
the controller card's BIOS.
Note – Perform this procedure only if you are using the StorageTek RAID controller
card.
▼ To Install the Sun StorageTek RAID
Management Utility Software
1. Insert the Tools and Drivers CD into the CD/DVD drive.
2. Navigate to the
command:
# cd /cdrom/cdrom0/RAIDmgt/SunStorageTEK/sx8
3. Enter the following command:
# pkgadd -d
28 Sun Fire X4150, X4250, and X4450 Servers Operating System Installation Guide • November 2009
"To Install Driver Directly Onto the Server" on page
RAIDmgt/SunStorageTEK/sx8 directory using the following
27. LSI