Installing VMware ESX Server From
Local Media
Installing VMware ESX Server 3.0.2 and later on your server, requires:
USB keyboard, mouse connected to rear USB ports of server, or access through a
■
remote console.
Monitor connected to server (not required if you are using remote KVMS)
■
If there is no built-in CD-ROM, choose either one of the following:
■
External USB CD/DVD drive connected to the server.
■
–or–
Virtual CD drive redirected through remote console (only if no physical drive
■
is present).
CD-ROM of VMware ESX media
■
The Installation and Upgrade Guide for VMware Infrastructure
■
▼ To Install VMware ESX Server From Local
Media
1. Turn on the server.
2. Insert the media into CD-ROM drive.
The server boots from the CD and the boot prompt appears:
boot:
3. Choose the interface that you would like to work with:
To work in graphical mode, press Enter.
■
–or–
To work in text mode, enter the following command:
■
esx text
4. From your network-connected system go to:
http://www.vmware.com/support/pubs/vi_pubs.html
5. Locate the Installation and Upgrade Guide for VMware Infrastructure.
Use the document to guide you through the installation process.
Chapter 6
Installing VMware ESX Server
61