Installing Opensolaris Os Using Local Or Remote Media - Sun Microsystems Fire X4150 Installation Manual

4. From the main menu, click the Remote Control tab and select Redirection.
The Redirection screen appears with a Launch Redirection button.
5. Click the Launch Redirection button to open a remote console window.
A screen appears with a Launch button. It also identifies your current host name,
IP address, and user name.
6. Click Launch.
7. Insert the OS CD/DVD to be installed on the server into the local CD/DVD
drive.
8. In the remote console window, select Storage, and then select Mount devices.
The Device Configuration window appears.
Note – If the local server has a CD/DVD drive, make sure that it does not contain a
bootable medium, or configure the server's BIOS so that the virtual CD/DVD drive
is higher on the boot list than the local CD/DVD drive.
9. In the Storage 1 Source field, from the drop-down list, select the CD/DVD drive
that you are using to install the OS.
10. Click Submit.
11. The instructions for installing the OS are the same as the instructions for using
a local CD/DVD drive and monitor. See
or Remote Media" on page
Installing OpenSolaris OS Using Local or
Remote Media
The following procedure describes how to boot the OpenSolaris 2009.06 operating
system installation from local or remote media. It assumes that you are booting the
installation media from one of the following sources:
OpenSolaris 2009.06 (or subsequent release) Live CD/DVD (internal or external
■
CD/DVD)
OpenSolaris 2009.06 (or subsequent release) Live CD ISO image (network
■
repository)
"Installing OpenSolaris OS Using Local
33.
Chapter 4 OpenSolaris Installation 33