Installing The Raid Management Utility Software; To Install The Sun Storagetek Raid Management Utility Software; To Install The Lsi Raid Management Utilities - Sun Microsystems Fire X4150 Installation Manual

Installing the RAID Management Utility
Software
Based on your system controller card, use the one of the methods described in the
following sections to install the RAID Management utility software.
Method
For a system with a
RAID controller card.
For a system with a LSI RAID
controller card.
▼ To Install the Sun StorageTek RAID
Management Utility Software
Note – Perform this procedure only if your server is equipped with a StorageTek
RAID controller card.
Caution – If you are installing RHEL5 32-bit Linux, you must install the following
package before running the Sun StorageTek Raid Management Utility:
linux/ xorg-x11-deprecated-libs-6.8.1-12.FC3.1.i386.rpm.
1. Insert the Tools and Drivers CD into the CD/DVD drive.
2. Navigate to the /drivers/linux/RAID/SunStorageTEK/ASM/[32bit|64bit]
directory using the following command:
# cd /drivers/linux/RAID/SunStorageTEK/ASM/[32bit|64bit]
3. Enter the following command:
# rpm -ivh [32bit|64bit].rpm

▼ To Install the LSI RAID Management Utilities

1. Insert the Tools and Drivers CD in the server's CD/DVD drive.
54 Sun Fire X4150, X4250, and X4450 Servers Operating System Installation Guide • November 2009
Procedure
StorageTek
"To Install the Sun StorageTek RAID Management
Utility Software" on page 54
"To Install the LSI RAID Management Utilities" on
page 54