Page 1
Digital Satellite Receiver SRT 6201 User Manual Bedienungsanleitung Manuel d'Utilisateur Istruzioni d’uso Uputstvo za upotrebu Руководство пользователя...
6.5 TELETEXT function 6.6 Subtitles function 7.0 TROublE shOOTINg 8.0 sPECIfICATIONs sTRONg declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; Rohs 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
PART 1 • English STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC RoHS 2002/95EEC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All product names are trademarks or registered trademarks of their respective owners.
USB 2.0 specifications, playback and other multimedia functions of the receiver would not work properly. STRONG cannot guarantee compatibility to all types of USB storage devices. If you are going to use external USB HDD (Hard Disk Drive) please consider that it might ...
PART 1 • English 4. Av Toggles between TV and receiver (AV) mode 5. Tv/R Toggles between TV or radio mode 6. MENu Opens the main menu 7. EXIT Exits from the menu or sub-menu and cancels the progressing function if applicable. 8.
PART 1 • English 4.0 sTARTINg uP Ensure your satellite signal is of good quality. It is recommended that you perform the first time installation following the Installation Wizard step by step. It will help you to easily achieve system configuration and channel installation.
PART 1 • English 5.0 MAIN MENu All important settings and features of your receiver can be operated in the Main Menu. It consists of the submenus: “Channel Organizer”, “Installation”, “System setting”, “Timer” and “Multimedia”. To open the MAIN MENU press MENu. 5.1 Channel Organiser In the MAIN MENU press p/q to move to Channel Organiser and press OK to enter the Channel Organiser menu.
PART 1 • English Edit satellite If the parameters of a satellite were changed or if you wish to add a new satellite, you must set the parameters of the satellite, such as LNB type, LNB low Freq, LNB High Freq, Transponder, LNB Power, 22k Tone, DiSEqC and Antenna Mode.
Page 11
PART 1 • English 5.3.1.2 Tv settings Use this option to set the TV mode, Screen mode, Video output and Modulator settings*. Tv mode Press OK or u to select mode and OK to confirm. If you don’t know your TV’s standard, select AUTO.
Page 12
Select this option in order to update your receiver with the latest software version. The software update service is available from satellite ASTRA 19.2E. If needed, parameters can be changed. Please ask your local STRONG dealer in NOTE: case the software update was not successful.
PART 1 • English 5.4 Timer You may set a timer to let the receiver perform designated actions. Use p/q to select timer. Press OK to enter the selected timer settings. Press REd to activate or inactivate the selected timer. 5.5 Multimedia The receiver can playback music &...
PART 1 • English To set a timer event: Use p/q to move the cursor to the programme for which you want to add a timer. Press REd to add a timer. It is possible to modify each value. To save the settings, press OK. To quit the event timer setup, press EXIT.
PART 1 • English 7.0 TROublE shOOTINg There may be various reasons for occurring abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact the dealer. Don’t open the receiver cover. This may cause a dangerous situation and will void warranty Cause Remedy...
S/PDIF: coaxial output USB port Multimedia: STRONG cannot guarantee the playback of external video files in different formats than specified! Audio playback – MP3 and WMA 9 (sdt) formats Picture view – JPEG, BMP and GIF format Video playback – MPG (VCD MPEG1, SVCD MPEG2, KVCD MPEG2) and AVI (MPEG4 DivX, Xvid)