Media - Strong SRT 3000 Installation Instructions Manual

After a few seconds, the receiver asks: "Are you sure to burn flash?". Select Yes to finalize the upgrade or No to quit
without upgrading.
noTe:
If, after a software upgrade, the receiver should behave in an unexpected way, please
perform a factory reset as well. See chapter 7.4.2.
Warning:
After an update the receiver restarts automatically. During the upgrade process NEVER
disconnect the receiver from the mains or switch off the power! Doing so might damage
your receiver and will void warranty!

7.5 Media*

The Media menu consists of the following submenus: Media Player, HDD Information, DVR Setting and Remove USB
device safely.
Use pq to highlight the menu of choice and press ok to enter. Press eXiT to quit.
7.5.1 Media Player
This function allows playback of different kind of files from the connected USB storage device. In the Media menu,
select Media Player and press ok to enter this menu.
When entering the media player, the highlight is on the USB storage device. Press q and ok to open the directory
respectively its folders/subfolders.
First select which files you like to play back. Press 1 to switch between Video/Record/Music or Image. Press pq to
select a file or folder and then press ok to open the folder/subfolder (if applicable) or start playback of the file. Press the
eXiT button to exit.
Use the buttons like described below in order to choose functions during the different playback modes (like described
in the help banner below):
video:
i: Press the i button to set repeat mode. The options are repeat folder folder icon/repeat once 1 or
no repetition (no icon shown).
1: During the playback of a movie with external subtitles, press 1 to enter the subtitle menu. In
this menu you can select size and colours of your preference.
2: Press 2 to open the Sort menu. You can sort by Name/Time or Size.
7: Press 7 to open the Edit menu. This menu allows access of the following functions by entering
the number: rename 4, copy 5, delete 6, create folder 7.
eXiT:
One step back or leave the folder and quit the function.
Record:*
2: Press 2 to enter a new name for the selected recording.
3: Highlight the recording that you want to lock. After pressing 3 you will be asked to input your
PIN code. DefAuLT Pin: "1234". After entering your PIN code, the recording is locked. If you
want to unlock the recording again, press 3 again.
4: Press 4 to mark the recording you want to delete. By selecting the same recording and pressing
4 again you can remove the delete marker again. Press eXiT to delete.
eXiT:
One step back or leave the folder and quit the function.
Music:
4: Press 4 to open a previously created play list. With the coloured buttons you can make changes
to the list.
5: Press 5 to add a file to the playlist. A favourite icon will be shown next to the file. (A single file
will be added to the play list) or 6 (all files of this directory/folder will be added to the play list).
15