System Setup - Strong SRT 3000 Installation Instructions Manual

7.2.2 Auto scan
Use pq to select Installation and press ok or u to advance.
Select Auto Scan with pq and press ok to enter.
Select your country and network base channel.
When FTA Only is set to Yes, scrambled channels won't be stored in the channel list. Use pq to highlight Search. Now
press ok to start auto scan.
The receiver will store all found channels in the channel list.
noTe:
Obtain technical data about your cable-operator base channel from your operator and start a
network search from there to find all channels belonging to the network.
7.2.3 Lcn (Logical channel numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided by the operator, channels will be stored
in an operator defined order. Set LCN to On to activate operator defined channel numbering or Off to store channels in
found order. This function only applies when a new channel search is performed.

7.3 system setup

This menu allows you to manage the system settings of your receiver. It consists of the following sub-menus: Language,
TV System, Local Time Setting, Timer Setting, Parental Lock, OSD Setting and Auto Standby.
Press pq to highlight the menu of choice and press ok advance to the next screen. Use pq to move the highlight to
the setting of choice. Values can be changed with tu. Press eXiT to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Use tu to select the language for the On Screen Display.
Language:
Use tu to select Audio language.
First Audio:
Use tu to select a language that will be played when the language selected at First Audio isn't
Second Audio:
available.
Use tu to select the preferred subtitle language.
Subtitle Language:
2nd Subtitle Language : Use tu to select the preferred 2nd subtitle language if the 1st preference is not available.
Use tu to select the preferred Teletext language (when available).
Teletext:
Use tu to select the preferred subtitle type to be displayed automatically. Select Normal, Hard
Subtitle:
of Hearing or Off*
*Availability of DVB/HoH subtitles depends on the broadcast. If subtitles are not supported, they can be activated via Teletext if available.
7.3.2 Tv system
Use this menu to match your receiver to your TV set. The following settings are available:
Video Resolution: Use this option to select the video resolution of your TV screen. The options are: By Source
(automatic detection of video resolution offered to the receiver), By Native TV (automatic
detection of maximal resolution of TV screen), and manual selections 480i, 576i up to 1080p.
Please use a setting that matches the specifications of your TV. After a selection is made, you
will be asked to confirm. Selection above 576i is only applicable on HDMI output.
Aspect Mode: Use this option to select the aspect ratio of your TV and the preferred conversion method. The
options are: Auto (automatic detection of aspect ratio), 4:3 Panscan (Displays 16:9 widescreen
broadcasts full screen on your 4:3 TV), 4:3 letterbox (black bars on top and under the picture on
a 4:3 TV) and 16:9 (use this setting for 16:9 TV sets).
Use this option to select the connection to your TV set. Select HDMI or TV SCART. If connection
Connection:
type HDMI is selected, then only the CVBS signal is available on the TV SCART.
Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital audio will be
converted to stereo audio. Bitstream enables you to listen or transfer Dolby® Digital/Dolby®
12