Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Strong SRT 5016
Summary of Contents for Strong SRT 5016
- Page 1 Digital Free-To-Air Terrestrial Receiver SRT 5016 User Manual...
-
Page 4: Table Of Contents
PART 1 • English TABLE OF CONTENTS 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2.0 CONNECTION 2.1 Connecting to Terrestrial Antenna 2.2 Connecting to TV and VCR with SCART cable 2.3 Connecting to TV with RCA cable 2.4 Connecting to a Digital Audio Amplifier 2.5 Connecting to PC 3.0 YOUR RECEIVER... -
Page 5: Instruction
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any another equipment; on a surface which might obstruct the ventilation slots DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES: To direct sunlight or near any other equipment that generates heat;... -
Page 6: Equipment Set-Up
PART 1 • English 1.3 Equipment Set-up We recommend you consult a professional installer to set up your equipment. Otherwise, please follow these instructions carefully: Refer to the user manual of your TV and your antenna Make sure that the SCART cable and outdoor components of the antenna are in a good condition and the SCART connections are well shielded This manual provides complete instructions for installing and using this receiver. -
Page 7: Connection
PART 1 • English Built-in UHF modulator RS-232 port for updating control software and additional services subject of local broadcast condition * Depending from Broadcaster Accessories: User’s Manual 1 Remote control unit 2x Batteries (AAA type) Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types of batteries. -
Page 8: Connecting To A Digital Audio Amplifier
PART 1 • English 2.4 Connecting to a Digital Audio Amplifier Fig. 3 Connect your digital Audio Amplifier with the S/PDIF connector on the back of the receiver 2.5 Connecting to PC Fig. 4 Connect the RS-232 connector of the receiver to the PC using a serial cable. This allows you to download new versions of software to your receiver. -
Page 9: Remote Control
PART 1 • English 8. VIDEO (YELLOW RCA) This connector gives you the possibility to connect the video signal to the TV set without a SCART connector. 9. Coax S/PDIF (BLACK RCA) To connect your receiver to digital audio amplifier 10. -
Page 10: First Time Installation
PART 1 • English Show list of subtitled languages current channel is supporting Switches back to previous channel 4.0 FIRST TIME INSTALLATION Make sure your terrestrial receiver is connected correctly to your TV and terrestrial antenna and the signal quality is good enough. -
Page 11: Channel Search
PART 1 • English channel to the new location and press OK to confirm. Repeat this for every channel you want to move. When the focus is on column “Del”, press OK to mark the channel to be deleted from the list. To apply changes, press EXIT and confirm channel deletion. - Page 12 PART 1 • English 5.3.1.2 TV Settings You can set TV Standard, TV Format and Video Output. TV Standard Press OK/RIGHT to select PAL or NTSC and OK to confirm. If you don’t know which standard your TV has, please select AUTO. TV Format Press OK/RIGHT to select 4:3, 4:3 FULL or 16:9, and OK to confirm.
- Page 13 PART 1 • English 5.3.3 Parental Control In this menu, you can set Channel Lock status (ON or OFF), the Menu Lock status, Parental Setting and change the PIN Code. The default PIN code is 0000. 5.3.3.1 Channel Lock Set the system Channel Lock to ON or OFF. If the channel lock is ON, the parental PIN code has to be entered correctly before watching the locked channel.
-
Page 14: Timer
PART 1 • English 5.3.5.2 Update through PC to STB 1. Connect Computer to receiver (receiver must be power off) with a 9-pin cross cable (two females). 2. The computer will follow the steps below: Start -> Programs -> Accessories -> Communications -> Hyper terminal Then choose “COM1”... -
Page 15: Game
PART 1 • English 5.5 Game The receiver has a calendar and three games (Mine, Tetris and Gomoku). Select a game and press OK for playing. Or you can press GAME key on normal play state to enter the game menu directly. 5.5.1 Mine UP / DOWN / LEFT / RIGHT: Move the cursor. -
Page 16: Teletext
PART 1 • English 3. To set up an event timer: Press UP/DOWN to move the cursor to the event for which you want to add a timer. Press OK to add a timer. To quit event timer setup, press EXIT. 6.3 Teletext In no-menu state, press TEXT. -
Page 17: Specifications
PART 1 • English Symptom Remedy General Standby indicator on Check if power is available at the wall socket. Check if the SCART cable front panel does not and antenna cable are correctly connected and the receiver is switched on. light up Disconnect these cables, and reconnect them to ensure they are in place Standby indicator on... - Page 18 PART 1 • English Audio Decoder MPEG MusiCam Layer I & II Sampling rate: 32, 44.1, 48 kHz Audio mode: Stereo, Joint Stereo, Dual Mono, Mono Tuner Front End: DVB-T, UHF & VHF Tuner Input frequency range: 174 ~ 230 MHz (VHF I/III) and 470 ~ 862 MHz (UHF) Loop through frequency range: 47 ~ 862 MHz Input signal level:...
-
Page 19: Glossary Of Terms
PART 1 • English A.3 GLOSSARY OF TERMS DVB-T Digital Video Broadcasting Terrestrial – Digital TV via antenna (same as DTT- Digital Terrestrial Television). MPEG Moving Picture Experts Group is founded by the ISO. MPEG is a standard method for digital transmission of video and audio. -
Page 20: Environmental Issues
Environmental Issues ENVIRONMENTAL ISSUES STRONG is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Packaging Do not dispose of this product with your When disposing of this domestic rubbish.