Reducing Motion Blur - Canon WX450ST User Manual

Customizing System Operation (System Settings)
Selecting a Channel on the
Remote control
You can change the channel on the
remote control as follows.
Ch1
Ch2
Ch3
Ch4
Independent Press and hold the OK
Downloaded From projector-manual.com Canon Manuals
Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
Press and hold the OK
button and [ ] button at the
same time for 3 seconds.
button and button at the
same time for 3 seconds.
Reducing Motion
Blur
> [System settings] >
reduction]
HDMI
Digital PC
Motion blur is blurring that occurs
during video playback. Motion blur
reduction can make this blurring
less noticeable. This function is
available in [Presentation] or
[Dynamic] image modes (P97).
Off Motion blur reduction is not
performed.
On Motion blur reduction is performed.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Off] is the factory default.
• If motion blur reduction generates
distracting image noise, select [Off].
• Effects of motion blur reduction cannot be
checked during menu display.
• Especially effective for motion of computer
graphics and similar high-resolution
images.
114
[Motion blur
Component LAN
Analog PC USB