Updating The Firmware; Resetting To The Default Setting - Canon WX450ST User Manual

Updating the
Firmware
> [System settings] > [Other settings] >
[Firmware]
HDMI
Digital PC
Use a firmware update program
stored on a USB flash drive to
update the projector firmware.
Download firmware updates from the
Canon website and store them at the
root directory on the USB flash
drive.
Select [Firmware], press the OK button,
and check the firmware version
displayed. Selecting [OK] will display an
update confirmation screen. To update
the firmware, select [Yes].
Firmware updating takes about three
minutes. During the update, the LED
indicator will flash in red. Do not turn off
the projector while the LED is flashing.
After the update, the projector will
automatically turn itself off and enter
standby mode.
• In some cases, it may not be
possible to download the update. If
so, contact the Canon Customer
Support Center.
• This firmware version is for
illustration only, and the actual
number will be different.
Downloaded From projector-manual.com Canon Manuals
Customizing System Operation (System Settings)
Component LAN
Analog PC USB
Resetting to the
Default Setting
> [System settings] > [Other settings] >
[Factory defaults]
HDMI
Digital PC
You can reset the menu item settings
and restore the system settings to
the factory defaults.
Select [Factory defaults] and press the
OK button. The following screen for
confirmation appears.
OK Settings are reset to default.
Cancel Settings are not reset to default.
• This function does not reset the values for
[Lamp counter], [Language], [Remote
control], [Input signal], [Network settings],
[Air filter counter], [Professional settings]
([Micro-digital image shift], [Registration],
[Fan mode], [Vertical projection], and [Edge
blending]) and [Create profile].
• For factory defaults settings, refer to
P313.
• The contents of the user memory return to
the conditions at the time it was saved.
(P98)
121
Component LAN
Analog PC USB
P306 -