Canon WX450ST User Manual page 185

Password
User name
New password
Confirm new password
TCP/IP
DHCP
IP address
Subnet mask
Default gateway
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Downloaded From projector-manual.com Canon Manuals
Item
When logging into the web
screen, enter the user name
in 1-byte alphanumeric
characters and symbols (4 -
15 characters).
When logging into the web
screen, enter the password in
1-byte alphanumeric
characters and symbols (4 -
15 characters).
For confirmation, enter the
same password that you
entered in [New password].
Select whether to turn the
DHCP function on or off. If the
function is on, because the IP
address is acquired from the
server, it is not possible to
enter the [IP address],
[Subnet mask], and [Default
gateway].
Enter the IP address of the
projector in 1-byte numbers.
Enter the subnet mask in 1-
byte numbers.
Enter the default gateway IP
address in 1-byte numbers.
Completing Computer Settings
Explanation
185
Factory default setting
root
system
system
OFF
192.168.254.254
255.255.255.0
0.0.0.0