Canon WX450ST User Manual page 196

Completing Computer Settings
Projector name
IP address
Refresh
Power
Input
Aspect
Image mode
Blank
Mute
Auto PC
Split screen
Split screen control
Information
5
When the operations are finished, click [Back to top] to return the initial
web screen.
Downloaded From projector-manual.com Canon Manuals
Item
The name of the connected projector is displayed. (P190)
The IP address of the connected projector is displayed. (P195)
Refreshes the displayed contents with the most recent information.
Turns projector power on or off.
Select an input signal and click [Apply] to change to that input
signal. (P53)
Select an aspect and click [Apply] to change to that aspect. (P66)
Select an image mode and click [Apply] to change to that image
mode. (P71)
Switches the blank setting on or off. (P76)
Switches the mute setting on or off. (P77)
Click [Apply] to perform Auto PC adjustment. (P57)
Select the setting for split-screen mode and click [Apply] to switch
to split-screen projection.
Select the control rights setting for split-screen mode and click
[Apply] to switch the side currently under control.
The control results and control error information are displayed at
the top of the screen.
Explanation
196